INTER-NETWORK PROCESSORS ( LAST PART )

HEY THIS IS THE LAST PART INFORMATION ABOUT INTER NETWORK PROCESSORS

What is Hubs Used in Inter-Networks Processors ?

Hubs are communications processors which allow for port-switching, similarly to switches. Both of these processors support automatic port-switching in order to provide shared resources access to the users of a particular networked environment. However, hubs do not manage traffic so every packet that enters any port is outputted on every other port, resulting in packet collision  that interrupt the flow of traffic.

When networks do not use the same protocols for the purpose of communication, they can be connected via gateways, using protocol conversion processes. In addition, gateways require congruent or at least mutually acceptable administrative procedures between the interconnecting networks. The duties of a gateway are usually much more complex than those of switches or routers.

THIS ARE SOME INFORMATION THAT I CAN GIVE YOU ABOUT INTER-NETWORKS PROCCESSORS , HOPE THIS WILL HELP YOU  A BIT ABOUT THIS TOPICS. .

THANKS FOR READING